PENTENS T-100 is a single component, a newly developed polymer of MMA, natural rubber, and polyurethane combined with asphalt and then modified and further emulsified to form an elastic waterproof membrane. PENTENS T-100 is an environmentally friendly and low VOC material.
Technical & Physical Data
| Form | Liquid |
| Colour | Black Coffee |
| Solid Content (%)(SS 133:1987 Appendix D) | 73.90 |
| Shore A Hardness (ASTM D2240:2005) | 57 |
| Crack Bridging (ASTM C 835:00) | 2mm |
| Tensile Strength (N/mm²) (ASTM D 412-98) | 3.1 |
| Elongation at Break (%) (ASTM D 412-98) | 1128.6 |
| Tear Strength (kgf/cm²) (CNS 6986, CNS 6988) | 14.7 |
| Water Penetration (DIN 1048 Part 5:1991) | 0 |
| Water Vapour Transmission of Materials (ASTM E96/ E96M:2005) | 18 g/m²/24 hrs |
| Puncture (kgf) (ASTM E154 | 19 |
| Chemical Resistance (10% HCOOH, 60˚C, 24 hrs) |
No Changes on the surface of the sample |
| Shelf Life |
1 year when unopened and undamaged |
| Storage Condition | Store in a dry, cool place |
| Packaging | 5kg, 20kg |
| Catalogue(PDF) | |
Advantages
- Low VOC & Non-formaldehyde.
- Environmentally friendly.
- High elasticity.
- Will bond to most surface.
- Does not run or creep under heat.
- Resists to a wide range of acids and alkalis.
- Can be applied directly on damp or wet surfaces.
- Odourless and produces no fumes.
- Non-toxic.
Uses
To provide better water and vapour proof in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing coating.
Areas of application include:
- Basement.
- RC flat roof.
- Floor slabs.
- Patios.
- Terraces.
- Balconies.
- Internal wet area.
- RC gutter.
- RC planter box.
- Lift pit.
- Retaining walls.
- Swimming pool.
- Fountain.
Method of Statement
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.
