WARRIOR TRS- TOILET REPAIR SET is a complete set of materials designed for D-I-Y (Do It Yourself) repair of toilet water leakage. It is the simplest and most economical product kit that allows everyone to stop toilet water leakage in a PROFESSIONAL way!

Warrior TRS-Toilet Repair Set is a complete set of materials designed for D-I-Y (Do It Yourself) repair of toilet water leakage. It is the simplest and most economical product kit that allows everyone to stop toilet leakage in professional way.

Equipment

• 1 x Warrior SS 10 Shower Seal 500ml
  • Function: Invisible and deep penetrating water repellent. Will penetrate and seal up the micro pores and cracks. Minimal stain and traces on surface
• 1 x Warrior W 1-D Cement Strengthener 500ml
  • Function: Significantly increases the increases the hardness and water tightness of the tile grout. Can be poured into cracks to seal up the gaps.
• 1 x Tile Grout 500g
  • Better bonding strength than normal white cement. Minimal shrinkage or crack
• F.O.C: Paint brush, plastic scrapper, plastic cup, latex gloves.

Instruction

• Clean the surface to be treated. Remove any faulty, loose or cracked tile joint.
• Allow the surface to dry for one day (do not use the toilet)
• Apply, by brush, Warrior SS 10 Shower Seal generously onto the entire tile joint
• After 30 minutes, apply second coat of Warrior SS 10. Wipe away the chemical residue on the tile surface
• After 30 minutes, add Warrior W 1-D Cement Strengthener to tile grout cement gradully and mix until a sticky homogenous paste is achieved. Press the grout cement paste into the tile joint firmly
• Wipe away the grout stain on the tile surface
• Allow one day for chemical curing and cement setting
• Job done

REMINDER: Always do a patch test of SS 10 (apply a drop on tile at a remote corner, and check for any undesirable surface staion the next day) prior to full scale application.